PRODUCT ADDED TO CART

Due to extremely large order volume and limited product availability our order processing times are currently a minimum of 15-20 business days + shipping.

Categories  

5ff369ba8a0c560079003234

JL 2dr: 4.5” Alpine RT4 Long Arm Suspension System – No Shocks

0 REVIEWS
SKU 1534200
$5,166.99
QTY:
Up Down

This item ships for free! (Continental U.S. only)

TeraFlex Alpine RT (Rogue Trail) Suspension Systems build on our already capable Alpine CT (Cross-Trail) Suspension Systems. These systems include all our top-of-the-line components.

The 4.5” Alpine RT4 Long Arm Suspension System excels on the highway, off-road, through the desert, or rock crawling! If that sounds impossible, just remember it’s a TeraFlex suspension system built on decades of research and development resulting in the ultimate suspension with a lifetime warranty. Bolt-on Alpine IR Long Control Arms & Brackets, Front and Rear HD Forged Adjustable Track Bars, and Front and Rear Track Bar Axle Brackets allow full suspension adjustability, while the Front SpeedBumps smooth out unexpected trail bumps.

Adjustable Alpine IR Long Control Arms balance front caster angle and pinion angles as well as optimize rear pinion angles, anti-squat geometry, and tire position on vehicles with 3-6” lifts. On higher lifts, Alpine Long Arm Brackets reposition frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during extreme droop as well as shock load transferred through the long control arms.

Alpine IR Control Arms feature our all-new Independent Rotation (IR) Bushings. These innovative bushings remove bushing bind during full suspension travel for less overall bushing load during articulation resulting in unrestricted droop as well as a noticeable ride improvement whether on the highway or the trail.

Front and Rear HD Forged Adjustable Track Bars, and Front and Rear Track Bar Axle Brackets improve steering response, center the axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling.

This results in improved suspension geometry and relaxed control arm angles for a superior ride quality and performance regardless of terrain. These systems restore front and rear roll axis angles to minimize brake dive and acceleration squat. TeraFlex suspension systems provide reduced noise, vibration, and harshness (NVH).

Alpine RT Suspension Systems are for the Jeeper who wants it all!

Does NOT include shocks. We recommend Falcon Performance Shocks. Falcon shock absorbers and TeraFlex lift coil springs have been engineered together to improve both compression and rebound for optimal vehicle stability. Falcon shock absorbers and steering stabilizers available separately.

FEATURES/BENEFITS

Alpine RT4:

• Lift Height: 4.5”
• Sport/Sahara Fenders: 35-37” Tires
• Rubicon Fenders: 37” Tires
• Aftermarket High Fenders: 39”+ Tires

RT Long Arm Suspension Systems:

• Adjustable Alpine IR Long Control Arms & Brackets balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 3-6” lift kits
• Alpine IR Long Control Arms are constructed from durable 42mm x 4mm (front upper) or 50mm x 5mm (front lower, rear upper, rear lower) wall DOM tube for maximum strength
• On higher lifts, Alpine Long Arm Brackets reposition frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during extreme droop as well as shock load transferred through the Alpine IR Long Control Arms
• Bolt-on Alpine Long Arm Brackets are gusseted and reinforced for superior strength w/ reduced NVH compared to other long arm kits
• Long Arm Suspension Crossmember and RockGuard Transmission Skid Plate & Long Arm Crossmember Reinforcement provide additional strength

Roque Trail:

• Delivers true Rogue Trail (RT) performance
• Dependable performance w/ zero worries
• Positive, responsive handling w/ reduced NVH
• Innovative IR Bushings provide unrestricted rotation and flex as well as excellent NVH damping
• Maintenance-free IR Bushings improve on- and off-road ride quality and performance
• HD Forged Adjustable Track Bars and Track Bar Bracket(s) improve steering response, center axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling
• Front SpeedBump and Rear Progressive Bump Stops provide progressive compression during high-speed suspension movement
• Features Front Sway Bar Quick Disconnects
• Full range of movement for off-road flex and articulation
• Install and drive simple bolt-on installation — no welding required
• TeraFlex Limited Lifetime Warranty against defects
• (See INCLUDES for included components)

INCLUDES

• 4.5” Lift Coil Spring Kits (JL2 Front: # 1864402 & JL2 Rear: # 1864302)
• Alpine IR Long Control Arm & Bracket Kit – 8-Arm (3-6” Lift) (# 1310512)
• HD Forged Adjustable Track Bar – Front (0-6” Lift) (# 1753420)
• HD Forged Adjustable Track Bar – Rear (0-6” Lift) (# 1754420)
• Front Track Bar Axle Bracket (4.5” Lift) (# 1953500)
• Rear Track Bar Axle Bracket (2.5-4.5” Lift) (# 1953600)
• SpeedBump & Progressive Bump Stop Kit – Front & Rear (0-4.5” Lift) (# 1958350)
• 2” Bump Stop Strike Pad Extension Kit – Front & Rear (# 1959500)
• 0.5” Bump Stop Strike Pad Shim Kit – Front & Rear (# 1959300)
• Front Sway Bar Quick Disconnect Kit (0-4.5” Lift) (# 1764000)
• 11.5” Rear Sway Bar Link Kit w/ Swivel Stud (# 1764300)
• RockGuard Transmission Skid Plate & Long Arm Crossmember Reinforcement (# 4609100)
• Front Brake Line Anchor Kit (# 1101255)
• All necessary hardware
• And more

VEHICLE FITMENT INFO

Fits:

• JL Wrangler (2-door)

Specs:

• Lift Height: 4.5”

Max Tire Diameter:

• Sport/Sahara Fenders: 35” (w/ 3” front & 2.5” rear bump stops)
• Sport/Sahara Fenders: 37” (w/ 3.5” front & 4” rear bump stops)
• Rubicon Fenders: 37” (w/ 2.5” front & 3” rear bump stops)
• Aftermarket High Fenders: 39”+ (varies)

PRODUCT NOTES

• Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters (# 1057000) for stock wheels.
• Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards to fit 35” or larger tires.
• Sport/Sahara Fenders require 3” Front and 2.5” Rear Bump Stop Extensions and Shims to fit 35” tires.
• Sport/Sahara Fenders require 3.5” Front and 4” Rear Bump Stop Extensions and Shims to fit 37” tires.
• Rubicon Fenders require 2.5” Front and 3” Rear Bump Stop Extensions and Shims to fit 37” tires.
• Aftermarket High Fenders required to fit 39”+ tires. Bump Stop Extension and Shim requirements will vary based on setup. Installer must check for clearances.
• May require an additional 0.5” Bump Stop Strike Pad Shim Kit (# 1959300).
• Requires cutting/removal of factory control arm bracketry to install Alpine Long Arm Brackets.
• Alignment required.
• Requires longer shocks – Falcon Performance Shocks recommended.

RELATED ITEMS

4.5” Suspension Systems – No Shocks:

• Alpine RT4 Long Arm (JL2: # 1534200) (JL4: # 1534000)
• Alpine CT4 Long Arm (JL2: # 1524200) (JL4: # 1524000)

• Sport ST4 (JL2: # 1614400) (JL4: # 1614000)

4.5” Coil Spring Base Lift Kit:

• No Shocks (JL2: # 1402402) (JL4: # 1402400)

Falcon Piggyback Shocks (2–4.5” Lift):

• SP2 3.5 aDAPT (JL2: # 10-04-35-400-200) (JL4: # 11-04-35-400-200) (ED: # 11-04-35-400-202)
• SP2 3.5 e-Adjust (JL2: # 10-03-35-400-200) (JL4: # 11-03-35-400-200) (ED: # 11-03-35-400-202)
• SP2 3.3 Fast Adjust (JL2: # 10-02-33-400-200) (JL4: # 11-02-33-400-200) (ED: # 11-02-33-400-202)
• SP2 3.1 (JL2: # 10-02-31-400-200) (JL4: # 11-02-31-400-200) (ED: # 11-02-31-400-202)

INSTALL TIME

27.5 Hours (28.5 Hours w/ shocks)